Best Ink Jets ink jets, cartridges & toners

Refill Ink Cartridges By Post

816 And 817 Hp F388 Cartridge Refilling Method

HP F388 One machine Refilling ink cartridges used as follows.

816 plus ink methods: 1, first Tissue Good material or other absorbent pad on the table, to prepare absorb overflow Ink .

2, the cartridge Label Gently torn off (not to tear up, still posted back) refilling hole exposed.

3, label the next five holes arranged guide holes and refilling the hole, generally can be injected into the ink, but for Security Please find the reasons of the black hole toward the light ink refilling hole hole identified.

4, stretching out with black ink bottle, remove the sealing cap, the needle upward air out the bottle as far as possible. Refilling the hole and then insert the needle as far as possible to fill a bit deeper, the amount should be controlled refilling ink cartridge capacity of 1 / 3 (4-5ML can).

5, his hands cartridges (refilling hole up) into the countertop side, shaking down the cartridge from the previous two to three. So that the ink cartridge is full.

6, clean the cartridge with a tissue Nozzle , Will be back to its original label affixed. The cartridge back into the Printer For 2 to 3 times “print head cleaning”, further Test Print or nozzle test. 817 plus ink methods:

1, first paper towels or other absorbent materials with good pad on the table, to prepare to absorb the overflow of the ink.

2, the cartridge label gently torn off (not to tear up, still posted back), showing refilling hole.

3, label the next five holes arranged guide holes and refilling the hole, the hole toward the light correctly distinguish between the three colors to be so refilling position (if not good resolution to use a toothpick).

4, out with blue (red or yellow) color ink retractable bottle, remove the sealing cap, the needle upward air out the bottle as far as possible. Then the needle into the appropriate color refilling hole, as far as possible to fill a bit deeper, the amount should be controlled refilling ink cartridge capacity of 1 / 3 (one for each color can 2ML).

5, his hands cartridges (refilling hole up) into the countertop side, shaking down from the previous two to three cartridges. So that the ink cartridge is full.

6, clean the cartridge nozzle with a tissue, paper and tape the label back to its original. The cartridge back into the printer 2 to 3 times “print head cleaning” and then print or nozzle test to test.

7, special attention is the color cartridge refilling should be careful in their own operation, so as not to spill the ink to flow from the hole caused by mixing the other hole.

Cost comparison: 1, a 816,817 cartridges prices of 300 yuan.

2, a zero-carbon technologies installed 400ML ink raw materials prices tens of dollars, you can add about 20-25 times, the average cost of a black cartridge is only 2-3 per color cartridge costs only 2-3 yuan Cycle Re-use, economical and affordable.

Fill 4 points should be noted:

1, once the ink cartridge must be intact;

2, please add the ink cartridge as soon as possible after use to avoid placing too long ink dry inside the block;

3, the key is to choose the successful refilling ink and high-quality scientific filled, try to use zero-carbon technology, ink raw materials, and is HP Dedicated filling ink; 4, add ink to moderate excessive if the ink will not only lead to Lou Mo, and spilled ink wet parts most likely affect the appearance. If you add too much ink, ink cartridges with a soft towel mop, and the print head, drain the excess ink.
About the Author

I am an expert from China Manufacturers, usually analyzes all kind of industries situation, such as metal shower rod , extension curtain rods.

Refill by Post Tutorial